Management Console Connection via CLI

The Command Line Interface (CLI) is accessible using your preferred application to establish an SSH session. Open a CLI terminal on your desktop, then:

1. Input the default IP Address of 192.168.0.1. SSH port 22 is enabled by default.

2. When prompted, enter the log in and password in the CLI.

3. After a successful log in, you’ll see a command prompt.

Accessing the Web GUI CLI Terminal

An alternative CLI terminal is provided within the Web GUI. To access this terminal, in the left-hand side Navigation Bar, navigate to the ACCESS > Local Terminal page. You will be required to submit your log-in credentials.