Power Connection
The CM8100 models have dual power inlets with auto failover built in. These power supplies accept AC input voltage between 100 and 240 VAC with a frequency of 50 or 60 Hz. See the following tables for typical power draw.
Two IEC AC power sockets, which use conventional IEC AC power cord, are located on the power side of the metal case.
Dual DC Power Supply. DDC models have a dual DC power supply with screw-in DC terminals (supplied).
Note: Country specific IEC power cords are included with the CM8100.
See also Dual Power Supply and System Alerts - Power.
| Console Manager platform (CM8100) Environmental and Power | |
|---|---|
| Power Supply | Dual AC |
| Power Draw CM8100 |
Typical ly <15W |
| Power Draw CM8100-10G |
CM8148-10G <25W Typical CM8196-10G <30W Typical. |
| Operating conditions | Temperature 5~50C, Rel Humidity 5~90% |
| Cooling | Passive |
| Power Draw Sensors |
|
| Console Manager platform (CM8148-10G-5G and CM8196-10G-5G) Environmental and Power | |
|---|---|
| Dual AC | Dual socket universal IEC C13 inlet 100-240V AC 50/60Hz (x2) |
| Dual DC | CM8148-10G-5G +/- 40V to 72V DC, 1.5A - 0.75A (x2) CM8196-10G-5G +/- 40V to 72V DC, 2A-1A (x2) |
| Power Consumption | CM8148-10G-5G Less than 25W (85 BTU/h) typical CM8196-10G-5G Less than 30W (102 BTU/h) typical |
| Operating conditions | 5°C to 50°C, 41°F to 122°F built-in temperature sensor, Humidity 5% to 90% (non-condensing), |
| Cooling | Passive Cooling - can be forward or reverse mounted |
| Power Draw Sensors |
|