SNMP Service

CONFIGURE > SNMP > SNMP Service

Navigate to the CONFIGURE > SNMP > SNMP Service to open the SNMP Service page.

SNMP Service allows you to specify which SNMP services to enable. When you click on ENABLED for SNMP V1 & V2 or SNMP V3, a detail form appears where you can add service specific settings.

You can also specify the SNMP Service Port and choose between UDP or TCP for the Protocol.

For SNMP v3, you can also set the Authentication Protocol to MD5, SHA, SHA-224, SHA-256, SHA-384, or SHA-512.