Power Connection
Note: The power cord is useable only with the device. Do not use it for any other purpose.
The CM8100 models have dual power inlets with built-in auto failover. These power supplies accept AC input voltage between 100 and 240 VAC with a frequency of 50 or 60 Hz. See the following tables for typical power draw.
Two IEC AC power sockets, which use conventional IEC AC power cords, are located on the power side of the metal case.
Notes:
- Dual DC Power Supply. DDC models have a dual DC power supply with screw-in DC terminals (supplied).
- Country specific IEC power cords are included with the CM8100.
For more information, see Dual Power Supply, and System Alerts - Power.
| Console Manager platform (CM8100) Environmental and Power | |
|---|---|
| Power Supply | Dual AC |
| Power Draw CM8100 |
Typical ly <15W |
| Power Draw CM8100-10G |
CM8148-10G <25W Typical CM8196-10G <30W Typical |
| Operating conditions | Temperature 5~50C, Rel Humidity 5~90% |
| Cooling | Passive |
| Power Draw Sensors |
|