Local Management Consoles

This feature allows Administrators to log in and configure the:

  • CM8100 via the RJ-45 ports on the device. Not accessible by USB.

  • CM8000 via the USB-C port on the device.

To edit the settings of a local management console:

  1. Navigate to CONFIGURE > Local Management Consoles.
    A list of consoles displays.

  2. Locate the console you want to manage, then under Actions, click on the Edit Management Console Port button (pencil icon).

  1. On the Edit Local Management Console page, you can set the parameters for:

    • Baud Rate

    • Data Bits

    • Parity

    • Stop Bits

    • Terminal Emulation

    • Enable or disable Kernel Debug Messages

      Note: Enabling Kernel Debug Messages can only be applied to a single serial management console.

    • Enable or disable the selected Management Console

To disable a local management console:

  1. Click CONFIGURE > Local Management Consoles.

  2. Locate the console you want to disable, then under Actions, click on the Disable Management Console Port button.