An example node-upgrade run
The following is an example node-upgrade command. It sets /mnt/data/nvram/latest-firmware as the directory node-upgrade looks to for the firmware image used as the source for all the firmware upgrade attempts. Every console server being managed from the active Lighthouse instance is targeted for an upgrade and the target console servers are set to upgrade to firmware 4.11.0.
# node-upgrade --all --firmware-dir /mnt/data/nvram/latest-firmware/ --version 4.11.0
NODE (UUID) MODEL FAMILY ADDRESS VERSION RESULT
----------------------------------------------------------------------------------------
cm7116-2 (nodes-4) CM7116-2 CM71XX 192.168.128.5 4.11.0 SUCCESS
im7208-2 (nodes-6) IM7208-2 IM72XX 192.168.128.7 4.10.0 SUCCESScm7196a-2 (nodes-5) CM7196A-2 CM7196 192.168.128.6 4.10.0 SUCCESS
acm7004-2 (nodes-2) ACM7004-2 ACM700X 192.168.128.3 4.11.0 SUCCESS
acm5508-2 (nodes-1) ACM5508-2 ACM550X 192.168.128.2 4.1.1u2 SUCCESS
acm7004-5 (nodes-3) ACM7004-5 ACM7004-5 192.168.128.4 4.11.0 SUCCESS
om2216-l (nodes-8) OM2216-L OMXXXX 192.168.128.9 21.Q2.1 FileNotFoundError
om1208-8e (nodes-7) OM1208-8E OMXXXX 192.168.128.8 21.Q2.1 FileNotFoundError
-
Version shows the device version prior to upgrade.
-
Result shows whether the upgrade for each device succeeded, or returns an error with more detail.