Create a Node Filter

Create from the Filter Management Page

1. Select > FILTERS AND TAGS > Filters.

2. Click the New Filter button.
   The PICK A FILTER TYPE selection displays.

3. Select Node Filter.
   The NEW NODE FILTER dialog displays.
   

4. Enter a Node Filter Name.

5. For each filter criteria:

   1. Select the Field to search from.

   2. Select the Operator.

   3. Enter the Value matched on.

6. To enter additional search parameters, click Add Criteria.

7. The option to select the Boolean operator (AND / OR) is displayed. The default selected option is AND.

   1. Select AND if the filter must match all values.

   2. Select OR if one or the other values must match.

8. Enter the additional details in the Field to search, Operator and Value fields.

   Note:  Click the icon to remove additional search parameters as necessary.

9. Click Add Filter.

Create from the Node Filter Control

1. Select Nodes.

2. Click the Filter Nodes control.

3. Click the Select Node Filter control.

4. Select New Node Filter.
   The filter criteria section displays.

5. Enter the criteria.

6. To enter additional search parameters, click Add Criteria.

7. Either:

   1. Apply without saving.

      2. Click Apply.
         The filter control updates to show Filter Nodes: New Node Filter * indicating a filter has been applied but has not been saved.

   2. Save the filter.

      1. Click the Save node filter icon.
         The SAVE NODE FILTER dialog displays.

      2. Enter the Node Filter Name.

      3. Review / update the filter criteria.

      4. Click Save and Apply.
         The filter control updates to show Filter Nodes: <Name of Filter> indicating a filter has been applied.

Note:  This is available on the Nodes > PENDING tab as well.