Create a Port Filter

Create from the Filter Management Page

1. Select > FILTERS AND TAGS > Filters.

2. Click the New Filter button.

3. The PICK A FILTER TYPE selection displays.

4. Select Port Filter.

5. The NEW PORT FILTER dialog displays.
   

6. Enter a Name .

7. For each filter criteria:

   1. Select the Field to search from.

   2. Select the Operator.

   3. Enter the Value matched on.

8. To enter additional search parameters, click Add Criteria.

9. The option to select the Boolean operator (AND / OR) is displayed. The default selected option is AND.

   1. Select AND if the filter must match all values.

   2. Select OR if one or the other values must match.

10. Enter the additional details in the Field to search, Operator and Value fields.

    Note: Click the icon to remove additional search parameters as necessary.

11. Click Add Filter.

Create from the Port Filter Control

1. Select Ports.

2. Click the Filter Ports control.

3. Click the Select Port Filter control.

4. Select New Port Filter.

5. The filter criteria section displays.

6. Enter the criteria.

7. To enter additional search parameters, click Add Criteria.

8. Either:

   1. Apply without saving.

      2. Click Apply.

      3. The filter control is also updated to show Filter Ports: New Port Filter * indicating a filter has been applied but has not been saved.

   2. Save the filter.

      1. Click the Save port filter icon.

      2. The SAVE PORT FILTER dialog displays.

      3. Enter the Port Filter Name.

      4. Review / update the filter criteria.

      5. Click Save and Apply.

      6. The filter control is updated to show Filter Ports: <Name of Filter> indicating a filter has been applied.