Check endpoints in Lighthouse

Note: Before you check the endpoints, ensure that you have created the SSH password to log into Lighthouse. For more information, see the Authentication type configuration information in step 4 of Create a virtual machine.

1. Ensure that you have completed the steps in Configure firewall rules for the virtual machine.

2. Open and log in to Lighthouse.

3. In the Settings Pane, select > SYSTEM > Network Settings.
   The NETWORK SETTINGS page displays.

4. Under External Network Addresses, confirm that the Azure instance public IP address has been added to the external endpoints.

   Notes:
   

   • At a minimum, ensure that there is at least one IP address present for use in node and secondary Lighthouse enrollment.

   • Ensure that your public IP address is listed first to avoid nodes trying to communicate with LH through any private IP addresses listed.