Session Settings

SETTINGS > SERVICES > Session Settings

Use Session Settings to set timeouts for console sessions where the users have been idle for a specified time. At timeout, the user’s web, CLI or Serial Port sessions are terminated, thus excluding authorized users with physical access to the node that has been left connected.

To set the timeouts for Web, CLI or Serial Port sessions settings, navigate to the SETTINGS > Services > Session Settings page.

• Web Session Timeout: Set the timeout from 1 to 1440 minutes.

• CLI Session Timeout: Set the timeout from 1 to 1440 minutes or set it to 0 to disable the timeout. Changes take effect the next time at the next login via the CLI.

• Serial Port Session Timeout: Set the timeout from 1 to 1440 minutes or set it to 0 to disable the timeout.

Click the Apply button to save the settings.

The new session timeout will take immediate effect on all pmshell sessions, including ones in use.