Network Interfaces

The interface supports both IPv4 and IPv6 networks. The IP address of the unit can be setup for Static or DHCP. The following settings can be configured for network ports:

• IPv4, IPv6

• Static and/or DHCP

• Enabling or disabling network interfaces

• Ethernet Media types

For detailed information about Network Interface configuration and adding a new connection, see Change Network Settings.

For information about VLAN interfaces, bridges, and bonds, see Bonds and Bridges

For information about creating or configuring Loopback Interfaces see Create or Configure a Loopback Interfacein the Config CLI Use Cases section of this User Guide.