Management Console Connection via CLI

The Command Line Interface (CLI) is accessible using your preferred application to establish an SSH session.

1. Open a CLI terminal on your desktop.
   

2. Input the default IP Address of 192.168.0.1.
   SSH port 22 is enabled by default.

3. When prompted, enter the log in and password in the CLI.
   After a successful log in, you’ll see a command prompt.

Access the WebUI CLI Terminal

An alternative CLI terminal is provided within the WebUI.

To access this terminal, in the left-hand side Navigation Bar, navigate to the ACCESS > Local Terminal page.

You are required to submit your log in credentials.