Power Connection
Note: The power cord is useable only with the device. Do not use it for any other purpose.
Operations Manager devices may be powered by either AC or 12V DC power supply (DDC models have dual DC terminals).
The OM1200 is available with 12V DC power only.
Note: Dual DC Power Supply. DDC models have a dual DC power supply with screw-in DC terminals (supplied).
AC Powered Operations Manager have dual power inlets with auto failover built in. These power supplies each accept AC input voltage between 100 and 240 VAC with a frequency of 50 or 60 Hz.
Two IEC AC power sockets are located on the power side of the metal case, and these IEC power inlets use conventional IEC AC power cords.
Note: Country specific IEC power cords are included with the AC Operations Manager.
For more information, see Dual Power Supply and System Alerts - Power.
| Operations Manager platform (OM2200) Environmental and Power | |
|---|---|
| Power Supply | Dual AC or 12V DC |
| Power Draw | 48 Watts for -24E, others <30W |
| Operating conditions | Temperature 5~50C, Rel Humidity 5~90% |
| Cooling | Passive |
| Environmental Sensors | Smart Controller with multi-zone temperature sensors. |
| Supervisory environmental controller with safety power down. | |
| Power Draw Sensors | Active multi-zone power draw monitoring. |
DC Powered OM1200
All OM1200 devices are shipped with a 12VDC to universal AC (multi-country clips) wall adapter and a barrel-jack connector. Additional AC to DC adapters may be ordered.
| Operations Manager platform (OM1200) Environmental and Power | |
|---|---|
| Power Supply | 12V DC |
| Power Draw | < 25 Watts |
| Operating conditions | Temperature 5~50C, Rel Humidity 5~90% |
| Cooling | Passive |
| Environmental Sensors | Smart Controller with multi-zone temperature sensors. |
| Auto-shutdown/re-boot on severe thermal events. | |
| Power Draw Sensors | Active multi-zone power draw monitoring. |