Config CLI Use Case Examples

Use case examples are available for the following:

• Users

• Ports

• Create or Configure a Loopback Interface

• Configure NET1 Static IPV4

• Configure NET2 Static IPV4

• Configure NET3 Static IPV4 for OM2224-24e units

• Configure WireGuard through Config Shell

• Passwords

• System Information

• Enable NETGRP - Set to ConsoleUser

• Change SSH Delimiiter to : default is +

• Enable TACACS - Set Mode to remotelocal

• Enable LLDP on NET1 & NET2

• Enable TFTP

• Enable Boot Messages

• Enable SIMM 1

• Enable Failover

• Syslog Server

• Set Port Logging Remote Syslog Settings

• Enable System Monitor SNMP Traps

• SNMP

• Create a Static Route

• Firewall

• Enroll Into Lighthouse