Connect to the Network

All Operations Manager products have two network connections labeled NET1 and NET2. In the:

• OM2200 there are options for copper wiring (on a standard RJ-45 connector) and fiber (through a standard SFP module).

• OM1300 there are options for copper wiring.

The network connections on the OM2200 are located on the serial port side of the unit. Connect the provided shielded CAT5 cable to the NET1 to a computer or into your network for initial configuration. By default, NET1 and NET2 are enabled.

You can use either 10/100/1000BaseT over Cat5 or fiber-optical transceiver (1Gbps) in the SFP slot for NET1 or NET2 on OM2200 (non-10G) and OM1208-8E.

Note: We do not support connecting both copper (RJ-45) and fiber (SFP) at the same time on the same interface.